Sheave Gauge – No cutout

• 1sheave gauges to help you quickly identify worn sheaves or damaged belts
• 2Manufactured using high-grade stainless steel 304 Grade and designed to withstand tough working condition

Request a Quote

Feeler Gauge Offset

• 1The feeler gauge is suitable for measuring slots, bearing play, measure the tappet clearances engines gaps everything in between and other hard to reach places

Request a Quote

Feeler Gauge

• 1The feeler gauge is suitable for measuring slots, bearing play, measure the tappet clearances engines gaps everything in between and other hard to reach places.

Request a Quote

Sheave Gauge – Cutout

• 1sheave gauges to help you quickly identify worn sheaves or damaged belts
• 2Manufactured using high-grade stainless steel 304 Grade and designed to withstand tough working condition

Request a Quote

Three-Point Caliper gauge

• 1The 3-point caliper gauge is made of high quality carbon tool steel T10A, it’s widely used in oilfield industry to Measure the outer diameter of the three ribs cylinders , drilling bits, oil pipelines, three-wing centralizers, and round parts

Request a Quote

Precision Steel Step Block- 5 Step Size : 2 -10mm

Standard Series Metric & Inches

• 1Precision Machined and Finished
• 2Made from 1018 Steel
• 3In accordance with ASTM E797-2015
• 2Includes PLASTIC Storage Box

Request a Quote

Sheave Gauge

Standard Series Metric & Inches

• 1 Top-quality wire rope and sheave gauges to help you quickly identify worn sheaves or damaged belts.
• 2 Each rope and sheave gauge are manufactured using high-grade stainless steel and designed to withstand tough working condition.

Request a Quote

CENTER GAUGE 55 DEG | 60 DEG KDG-25A | KDG-25B

Standard Series Metric & Inches

• 1Fish tail thread gauge for inspection of the angle of lathe center, angle of the tool for screw cutting, etc.
• 2Can check the angle of tool bits and tool edges
• 3 It is made of stainless steel

Request a Quote

TAPER GAUGE 1-15MM KDG-10A

Standard Series Metric & Inches

• 1A metric and an inch measurement scale
• 2For measurement of groove, gap, hole diameter etc.
• 3It is made of stainless steel

Request a Quote

TAPER GAUGE 15-30MM KDG-10B

Standard Series Metric & Inches

• 1A metric and an inch measurement scale
• 2For measurement of groove, gap, hole diameter etc.
• 3It is made of stainless steel

Request a Quote

TAPER GAUGE 30-45MM KDG-10C

Standard Series Metric & Inches

• 1A metric and an inch measurement scale
• 2For measurement of groove, gap, hole diameter etc.
• 3It is made of stainless steel

Request a Quote

TAPER GAUGE 45-60MM KDG-10D

Standard Series Metric & Inches

• 1A metric and an inch measurement scale
• 2For measurement of groove, gap, hole diameter etc.
• 3It is made of stainless steel

Request a Quote

PIPE PIT GAGE KDG-11

Standard Series Metric & Inches

• 1Range is 0 to 1/2″ in 1/64* & .010 Increments
• 2Arm Can be Locked in Place at Any Dimension
• 3On the front are handy formulas and on the reverse are decimal equivalents
• 4It is made of stainless steel

Request a Quote

STANDARD WIRE GAUGE KDG-12

Standard Series Metric & Inches

• 1Designed to gage steel wire and drill rod as well as nonferrous metals such as copper, brass, etc.
• 2Scale: 0.3125″-0.007″ (83*2mm)
• 30-36 standard range.
• 4Outer Diameter: Approx. 8.4cm/ 3.31″

Request a Quote

POCKET STEEL RULER 150MM/6” KDG-21B

Standard Series Metric & Inches

• 1It is made of stainless steel
• 212mm blade width with pocket clip/depth gauge slide
• 3Reverse side is marked with 1/64″ to mm conversion table for easy accurate measurements

Request a Quote

POCKET FILLET WELD GAUGE KDG-22A

Standard Series Metric & Inches

• 1Checks leg length, throat size, and allowable convexity
• 2Permanently engraved with all increments
• 3A handy keychain holds a set together for pre-inspection
• 4Fillets measure 8 size in pocket size
• 5It is made of stainless steel

Request a Quote

ADJUSTABLE FILLET WELD GAUGE KDG-34

Standard Series Metric & Inches

• 1Measures weld throat thickness and filter weld Measurement
• 2It is made of stainless steel

Request a Quote

DEGREE PROTRACTOR 180 DEGREE KDG-44

Standard Series Metric & Inches

• 1The Protractor is made of sturdy stainless steel, permanently engrave markings , durable with long service life.
• 2Adjustable protractor ruler arm that can be held in place with the knurled locking nut; quickly and easily identify angles.
• 3The ruler protractor is suitable for setting bevels, draw radial lines, measuring and marking angles

Request a Quote

ACME SCREW GRINDING GAUGE KDG-45

Standard Series Metric & Inches

• 1This Steel Screw Pitch Gauge is easy to use, light and delicate, with precise measurements and simple design, which can be widely used and durable.
• 2Standard gauge for grinding and setting tools when cutting Acme threads.
• 3Acme thread inclination: 30 degree inclined angle
• 4It is made of stainless steel

Request a Quote

SQUARE WET FILM GAUGE KDG-48

Standard Series Metric & Inches

• 1Dual-scale measuring device with one side measuring 25-2032 µm and the other measuring 1-80 mils
• 2It is made of stainless steel

Request a Quote

TAPER GAUGE & RULER SET KDG-49

Standard Series Metric & Inches

• 1Size 1-15mm & 15cm Ruler
• 2Length : 160mm
• 3Easily hangs or carries with a hole on one side
• 4A thin, light weight, precise, and professional product

Request a Quote

CENTER FINDER GAUGE 100X70MM KDG-50A

Standard Series Metric & Inches

• 1Centre Finder Gauge is used to find the center point of a square or cylindrical object.
• 2It is made of stainless steel
• 3laser engraved scales give outstanding measurement accuracy

Request a Quote

Fillet Weld Gauge 7 p.c  KDG-09B

Standard Series Metric & Inches

• 1 Checking the length of the fillet legs & Fillet Throat 3-25 mm.
• 2 Chrome-plated and Rubber-coated, color coded by size, quick access to the right tool.
• 3 The dimensions of even fillets can be measured easily and accurately
• 4 It is made of stainless steel

Request a Quote

V-Wac Single Weld Gauge  KDG-08

Standard Series Metric & Inches

• 1Checks Undercut
• 2Checks Crown Height
• 3 Checks Porosity
• 4Checks Pits
• 5An easy-to-read laser scale with high accuracy
• 6 It is made of stainless steel

Request a Quote

Skew-T Fillet Weld Gauge – KDG-07

Standard Series Metric & Inches

• 1 Checking Angle of Vertical Member
• 2 Checking Weld Acute Side
• 3 Checking Weld Obtuse Side
• 4 It is made of stainless steel

Request a Quote

Welding Seam Gauge – KDG-06

Standard Series Metric & Inches

• 1 for measurements of flat welding seams and in corners etc.
• 2 Measuring range: 0 – 20 mm Resolution: 0.1 mm Angle: 60° / 70° / 80° / 90° with vernier reading It is made of stainless steel

Request a Quote

Hi-Lo Welding Gauge- KDG-01

Standard Series Metric & Inches

• 1 Measures internal alignment of pipe after fit-up/alignment, cuts radiographic rejects.
• 2 Measures internal misalignment of pipe before and after tracking.
• 3The gauge body can be removed, the scales turned over, and the body replaced to change from standard to metric
• 4 Measure fit-up gap, bevel on end preparation, and weld crown height
• 5 Standard measurements on one side and metric measurements on the other
• 6 Stainless steel construction
• 7Meets ASME, ANSI, API & military fit-up codes

Request a Quote

Digital Welding Seam Gauge- KDG-05

Standard Series Metric & Inches

• 1 Measures butt weld reinforcement
• 2 Measures throat
• 3 LCD display
• 4 IN/MM switch
• 5 ON/OFF switch
• 6 Hold switch
• 7 Output connector
• 8 Slider clamp screw

Request a Quote

Bridge Cam Gauge – KDG-04B

Standard Series Metric & Inches

• 1 Angle of preparation, 0° to 60°
• 2 Excess weld metal (capping size)
• 3 Depth of undercut
• 4 Depth of pitting
• 5Fillet weld throat size
• 6Fillet weld length
• 7 Misalignment (High-Low)

Request a Quote

Automatic Weld Size Gauge ( AWS )  KDG-03

Standard Series Metric & Inches

• 1To check the permissible tolerance of convexity. With the new improved A.W.S. Gauge you can meet specifications of butt and fillet type welds.
• 2 New redesigned instrument is pocket size and easy to operate. New feature includes thumb screws which replace old hard to operate rivet types.
• 3 Welders and inspectors may accurately check size of convex or concave fillets as well as butt weld reinforcements.
• 4The convexity and concavity size have automatically been predetermined in accordance with American Welding Society DI.I Paragraph 3.6.
• 5Instrument is precision built of stainless steel with dimensional readings chemically etched and filled for easier reading

Request a Quote

Single Purpose Hi-Low Gage – KDG-02

Standard Series Metric & Inches

• 1 It is made of stainless steel
• 2 Measuring scale : Metric & Inches
• 3Root Weld Space
• 4Eliminates Rejects – Improves Productivity
• 5Internal Misalignment

Request a Quote